contiki:a-n-solutions-module:tests:siclowmac.c
/* * Copyright (c) 2008, Swedish Institute of Computer Science. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the Institute nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * This file is part of the Contiki operating system. * * $Id: sicslowmac.c,v 1.8 2010/06/14 19:19:17 adamdunkels Exp $ */ /** * \file * MAC interface for packaging radio packets into 802.15.4 frames * * \author * Adam Dunkels <[email protected]> * Eric Gnoske <[email protected]> * Blake Leverett <[email protected]> * Niclas Finne <[email protected]> * Joakim Eriksson <[email protected]> */ #include <string.h> #include "net/mac/sicslowmac.h" #include "net/mac/frame802154.h" #include "net/packetbuf.h" #include "net/queuebuf.h" #include "net/netstack.h" #include "lib/random.h" #define DEBUG 1 #if DEBUG #include <stdio.h> #define PRINTF(...) printf(__VA_ARGS__) #define PRINTADDR(addr) PRINTF(" %02x%02x:%02x%02x:%02x%02x:%02x%02x ", ((uint8_t *)addr)[0], ((uint8_t *)addr)[1], ((uint8_t *)addr)[2], ((uint8_t *)addr)[3], ((uint8_t *)addr)[4], ((uint8_t *)addr)[5], ((uint8_t *)addr)[6], ((uint8_t *)addr)[7]) #else #define PRINTF(...) #define PRINTADDR(addr) #endif /** \brief The sequence number (0x00 - 0xff) added to the transmitted * data or MAC command frame. The default is a random value within * the range. */ static uint8_t mac_dsn; /** \brief The 16-bit identifier of the PAN on which the device is * sending to. If this value is 0xffff, the device is not * associated. */ static uint16_t mac_dst_pan_id = IEEE802154_PANID; /** \brief The 16-bit identifier of the PAN on which the device is * operating. If this value is 0xffff, the device is not * associated. */ static uint16_t mac_src_pan_id = IEEE802154_PANID; /*---------------------------------------------------------------------------*/ static int is_broadcast_addr(uint8_t mode, uint8_t *addr) { int i = mode == FRAME802154_SHORTADDRMODE ? 2 : 8; while(i-- > 0) { if(addr[i] != 0xff) { return 0; } } return 1; } /*---------------------------------------------------------------------------*/ static void send_packet(mac_callback_t sent, void *ptr) { frame802154_t params; uint8_t len; /* init to zeros */ memset(¶ms, 0, sizeof(params)); /* Build the FCF. */ params.fcf.frame_type = FRAME802154_DATAFRAME; params.fcf.security_enabled = 0; params.fcf.frame_pending = 0; params.fcf.ack_required = packetbuf_attr(PACKETBUF_ATTR_RELIABLE); params.fcf.panid_compression = 0; /* Insert IEEE 802.15.4 (2003) version bit. */ params.fcf.frame_version = FRAME802154_IEEE802154_2003; /* Increment and set the data sequence number. */ params.seq = mac_dsn++; /* Complete the addressing fields. */ /** \todo For phase 1 the addresses are all long. We'll need a mechanism in the rime attributes to tell the mac to use long or short for phase 2. */ params.fcf.src_addr_mode = FRAME802154_LONGADDRMODE; params.dest_pid = mac_dst_pan_id; /* * If the output address is NULL in the Rime buf, then it is broadcast * on the 802.15.4 network. */ if(rimeaddr_cmp(packetbuf_addr(PACKETBUF_ADDR_RECEIVER), &rimeaddr_null)) { /* Broadcast requires short address mode. */ params.fcf.dest_addr_mode = FRAME802154_SHORTADDRMODE; params.dest_addr[0] = 0xFF; params.dest_addr[1] = 0xFF; } else { rimeaddr_copy((rimeaddr_t *)¶ms.dest_addr, packetbuf_addr(PACKETBUF_ADDR_RECEIVER)); params.fcf.dest_addr_mode = FRAME802154_LONGADDRMODE; } /* Set the source PAN ID to the global variable. */ params.src_pid = mac_src_pan_id; /* * Set up the source address using only the long address mode for * phase 1. */ rimeaddr_copy((rimeaddr_t *)¶ms.src_addr, &rimeaddr_node_addr); params.payload = packetbuf_dataptr(); params.payload_len = packetbuf_datalen(); len = frame802154_hdrlen(¶ms); if(packetbuf_hdralloc(len)) { int ret; frame802154_create(¶ms, packetbuf_hdrptr(), len); PRINTF("6MAC-UT: %2X", params.fcf.frame_type); //PRINTADDR(params.dest_addr.u8); /*sz*/ PRINTF("%u\n\n!Sending data:%u!\n\n gesamt: (max 127) (%u)\n", len, packetbuf_datalen(), packetbuf_totlen()); /*sz*/ ret = NETSTACK_RADIO.send(packetbuf_hdrptr(), packetbuf_totlen()); if(sent) { switch(ret) { case RADIO_TX_OK: sent(ptr, MAC_TX_OK, 1); break; case RADIO_TX_ERR: sent(ptr, MAC_TX_ERR, 1); break; } } } else { PRINTF("6MAC-UT: too large header: %u\n", len); } } /*---------------------------------------------------------------------------*/ void send_list(mac_callback_t sent, void *ptr, struct rdc_buf_list *buf_list) { if(buf_list != NULL) { queuebuf_to_packetbuf(buf_list->buf); send_packet(sent, ptr); } } /*---------------------------------------------------------------------------*/ static void input_packet(void) { frame802154_t frame; int len; len = packetbuf_datalen(); if(frame802154_parse(packetbuf_dataptr(), len, &frame) && packetbuf_hdrreduce(len - frame.payload_len)) { if(frame.fcf.dest_addr_mode) { if(frame.dest_pid != mac_src_pan_id && frame.dest_pid != FRAME802154_BROADCASTPANDID) { /* Not broadcast or for our PAN */ PRINTF("6MAC: for another pan %u\n", frame.dest_pid); return; } if(!is_broadcast_addr(frame.fcf.dest_addr_mode, frame.dest_addr)) { packetbuf_set_addr(PACKETBUF_ADDR_RECEIVER, (rimeaddr_t *)&frame.dest_addr); if(!rimeaddr_cmp(packetbuf_addr(PACKETBUF_ADDR_RECEIVER), &rimeaddr_node_addr)) { /* Not for this node */ PRINTF("6MAC: not for us\n"); return; } } } packetbuf_set_addr(PACKETBUF_ADDR_SENDER, (rimeaddr_t *)&frame.src_addr); PRINTF("6MAC-IN: %2X", frame.fcf.frame_type); PRINTADDR(packetbuf_addr(PACKETBUF_ADDR_SENDER)); PRINTADDR(packetbuf_addr(PACKETBUF_ADDR_RECEIVER)); /*sz*/ printf("\n\n!Incoming Data %u!\n\n", packetbuf_datalen()); /*sz*/ NETSTACK_MAC.input(); } else { PRINTF("6MAC: failed to parse hdr\n"); } } /*---------------------------------------------------------------------------*/ static int on(void) { return NETSTACK_RADIO.on(); } /*---------------------------------------------------------------------------*/ static int off(int keep_radio_on) { if(keep_radio_on) { return NETSTACK_RADIO.on(); } else { return NETSTACK_RADIO.off(); } } /*---------------------------------------------------------------------------*/ static void init(void) { mac_dsn = random_rand() % 256; NETSTACK_RADIO.on(); } /*---------------------------------------------------------------------------*/ static unsigned short channel_check_interval(void) { return 0; } /*---------------------------------------------------------------------------*/ const struct rdc_driver sicslowmac_driver = { "sicslowmac", init, send_packet, send_list, input_packet, on, off, channel_check_interval }; /*---------------------------------------------------------------------------*/
contiki/a-n-solutions-module/tests/siclowmac.c.txt · Zuletzt geändert: 2017/01/24 18:49 von 127.0.0.1